Bluetooth 5.0 Modem Design for IoT Devices

by Khaled Salah Mohamed
Bluetooth 5.0 Modem Design for IoT Devices
Author: Khaled Salah Mohamed
Publisher: Springer Nature
Total Pages: 120
Release: 2021-11-13
Genre: Technology & Engineering
ISBN: 3030886263
GET BOOK

This book provides an introduction to Bluetooth technology, with a specific focus on developing a hardware architecture for its modem. The major concepts and techniques involved in Bluetooth technology are discussed, with special emphasis on hardware mapping. The book starts simply to allow the reader to master quickly the basic concepts, before addressing the advanced features. This book differs from existing content in that it presents Bluetooth Transceiver architecture suitable for implementation in an FPGA for IoT Devices. It will examine several digital algorithms for modulation and demodulation of Bluetooth signals, locking on the carrier phase, and synchronizing the symbol. Many of these previously analog designs have been translated to the digital domain.

Make: Volume 83

by Dale Dougherty
Make: Volume 83
Author: Dale Dougherty
Publisher: Maker Media, Inc.
Total Pages: 144
Release: 2022-11
Genre: Technology & Engineering
ISBN: 1680457896
GET BOOK

It's been another tumultuous year in the world of embedded electronics: Supply chain snags have scarcely relented, while new chips jostle for position as the go-to for makers. In this issue of Make:, we look at how scarcity is affecting the industry and impacting new and stalwart boards alike. We explore how RISC-V chip architecture is putting open silicon in the hands of makers. And if your favorite board is out of stock, we offer smart substitutes. Also included is our annual Make: Guide to Boards comparing 79 of the hottest microcontrollers, single-board computers, and FPGAs â?? with an emphasis on those you can actually get your hands on. Plus, 25 projects to make, including: Use full-color LED strings and a Pixelblaze controller to make cuddly animated pillows. Stitch a stylish and sturdy roll-up tool carrier for on-the-go fixes and builds. Convert your 3D printer to 5-axis and print the impossible. Take control of smart home gadgets with Z-Wave and Raspberry Pi. Make a fun paper airplane that blows bubbles as it soars. And much more!

IoT Fundamentals

by David Hanes
IoT Fundamentals
Author: David Hanes
Publisher: Cisco Press
Total Pages: 782
Release: 2017-05-30
Genre: Computers
ISBN: 0134307089
GET BOOK

Today, billions of devices are Internet-connected, IoT standards and protocols are stabilizing, and technical professionals must increasingly solve real problems with IoT technologies. Now, five leading Cisco IoT experts present the first comprehensive, practical reference for making IoT work. IoT Fundamentals brings together knowledge previously available only in white papers, standards documents, and other hard-to-find sources—or nowhere at all. The authors begin with a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions. Next, they walk through each key technology, protocol, and technical building block that combine into complete IoT solutions. Building on these essentials, they present several detailed use cases, including manufacturing, energy, utilities, smart+connected cities, transportation, mining, and public safety. Whatever your role or existing infrastructure, you’ll gain deep insight what IoT applications can do, and what it takes to deliver them. Fully covers the principles and components of next-generation wireless networks built with Cisco IOT solutions such as IEEE 802.11 (Wi-Fi), IEEE 802.15.4-2015 (Mesh), and LoRaWAN Brings together real-world tips, insights, and best practices for designing and implementing next-generation wireless networks Presents start-to-finish configuration examples for common deployment scenarios Reflects the extensive first-hand experience of Cisco experts

Internet of Things for Sustainable Community Development

by Abdul Salam
Internet of Things for Sustainable Community Development
Author: Abdul Salam
Publisher: Springer Nature
Total Pages: 347
Release: 2019-12-28
Genre: Technology & Engineering
ISBN: 3030352919
GET BOOK

This book covers how Internet of Things (IoT) has a role in shaping the future of our communities. The author shows how the research and education ecosystem promoting impactful solutions-oriented science can help citizenry, government, industry, and other stakeholders to work collaboratively in order to make informed, socially-responsible, science-based decisions. Accordingly, he shows how communities can address complex, interconnected socio-environmental challenges. This book addresses the key inter-related challenges in areas such as the environment, climate change, mining, energy, agro-economic, water, and forestry that are limiting the development of a sustainable and resilient society -- each of these challenges are tied back to IoT based solutions. Presents research into sustainable IoT with respect to wireless communications, sensing, and systems Provides coverage of IoT technologies in sustainability, health, agriculture, climate change, mining, energy, water management, and forestry Relevant for academics, researchers, policy makers, city planners and managers, technicians, and industry professionals in IoT and sustainability

Demystifying Internet of Things Security

by Sunil Cheruvu
Demystifying Internet of Things Security
Author: Sunil Cheruvu
Publisher: Apress
Total Pages: 488
Release: 2019-08-14
Genre: Computers
ISBN: 9781484228951
GET BOOK

Break down the misconceptions of the Internet of Things by examining the different security building blocks available in Intel Architecture (IA) based IoT platforms. This open access book reviews the threat pyramid, secure boot, chain of trust, and the SW stack leading up to defense-in-depth. The IoT presents unique challenges in implementing security and Intel has both CPU and Isolated Security Engine capabilities to simplify it. This book explores the challenges to secure these devices to make them immune to different threats originating from within and outside the network. The requirements and robustness rules to protect the assets vary greatly and there is no single blanket solution approach to implement security. Demystifying Internet of Things Security provides clarity to industry professionals and provides and overview of different security solutions What You'll Learn Secure devices, immunizing them against different threats originating from inside and outside the network Gather an overview of the different security building blocks available in Intel Architecture (IA) based IoT platforms Understand the threat pyramid, secure boot, chain of trust, and the software stack leading up to defense-in-depth Who This Book Is For Strategists, developers, architects, and managers in the embedded and Internet of Things (IoT) space trying to understand and implement the security in the IoT devices/platforms.

Cellular Internet of Things

by Olof Liberg
Cellular Internet of Things
Author: Olof Liberg
Publisher: Academic Press
Total Pages: 776
Release: 2019-11-28
Genre: Technology & Engineering
ISBN: 0081029039
GET BOOK

Cellular Internet of Things: From Massive Deployments to Critical 5G Applications, Second Edition, gives insights into the recent and rapid work performed by the 3rd Generation Partnership Project (3GPP) and the Multefire Alliance (MFA) to develop systems for the Cellular IoT. Beyond the technologies, readers will learn what the mMTC and cMTC market segments look like, deployment options and expected performance in terms of system capacity, expected battery lifetime, data throughput, access delay time and device cost, regulations for operation in unlicensed frequency bands, and how they impact system design and performance. This new edition contains updated content on the latest EC-GSM IoT, LTE-M and NB-IoT features in 3GPP Release 15, critical communication, i.e. URLLC, specified in 3GPP Release 15 for both LTE and NR, LTE-M and NB-IoT for unlicensed frequency bands specified in the Multefire Alliance (MFA), and an updated outlook of what the future holds in Industrial IoT and drone communications, amongst other topics. - Provides ubiquitous wireless connectivity for a diverse range of services and applications, describing their performance and how their specifications were developed to meet the most demanding requirements - Describes licensed and unlicensed technologies based on 2G, 4G and 5G technologies and how they have evolved towards the Cellular IoT - Presents the Narrowband Internet of Things technology and how GSM, LTE and NR have been designed to provide Cellular Internet of Things services - Provides use cases that cover ultra-low complex systems connecting billions of devices (massive MTC, mMTC), critical MTC and cMTC based on Ultra-Reliable and Low Latency Communications (URLLC) to meet strict latency and reliability requirements

Machine-to-machine (M2M) Communications

by Carles Anton-Haro
Machine-to-machine (M2M) Communications
Author: Carles Anton-Haro
Publisher: Elsevier
Total Pages: 427
Release: 2014-12-23
Genre: Technology & Engineering
ISBN: 1782421106
GET BOOK

Part one of Machine-to-Machine (M2M) Communications covers machine-to-machine systems, architecture and components. Part two assesses performance management techniques for M2M communications. Part three looks at M2M applications, services, and standardization. Machine-to-machine communications refers to autonomous communication between devices or machines. This book serves as a key resource in M2M, which is set to grow significantly and is expected to generate a huge amount of additional data traffic and new revenue streams, underpinning key areas of the economy such as the smart grid, networked homes, healthcare and transportation. - Examines the opportunities in M2M for businesses - Analyses the optimisation and development of M2M communications - Chapters cover aspects of access, scheduling, mobility and security protocols within M2M communications