Developments in Rubber Technology—4

by K.S. Lee
Developments in Rubber Technology—4
Author: K.S. Lee
Publisher: Springer Science & Business Media
Total Pages: 317
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 9400934351
GET BOOK

This volume, the fourth in a series which began in 1979, covers a greater variety of subjects than any previous single volume. The basis of selection has been topical interest; hence the tailor-making of polymers to develop specific properties, methods of improving com pound processability and the use of rubbers in the oil industry are featured alongside a discussion of safety aspects. We have again sought the cooperation of the foremost authorities on the chosen subjects and have been delighted at the response which has yielded a list of authors of international repute. A. w. K. S. L. CONTENTS Preface v List of Contributors ix 1. Recent Developments in Synthetic Rubbers by Anionic Polymerization 1 I. G. HARGIS, R. A. LIVIGNI and S. L. AGGARWAL 2. Advances in Nitrile Rubber (NBR) 57 P. W. MILNER 3. Epoxidized Natural Rubber. 87 C. S. L. BAKER and I. R. GELLING 4. Process Aids and Plasticizers . 119 B. G. CROWTHER 5. A Review of Elastomers Used for Oilfield Sealing Environments . 159 W. N. K. REVOLTA and G. C. SWEET 6. Using Modern Mill Room Equipment . 193 H. ELLWOOD 7. Quality Requirements and Rubber Mixing . 221 P. S. JOHNSON 8. Health and Safety . . 253 B. G. WILLOUGHBY Index . 307 vii LIST OF CONTRIBUTORS s. L. AGGARWAL Gen Corp , Research Division, 2990 Gilchrist Road, Akron, Ohio 44305, USA C. S. L. BAKER Malaysian Rubber Producers' Research Association, Tun Abdul Razak Laboratory, Brickendonbury, Hertford SG13 8NL, UK B. G.

Rubber Technology

by John S. Dick
Rubber Technology
Author: John S. Dick
Publisher:
Total Pages: 567
Release: 2009
Genre: Rubber
ISBN: 9783446421554
GET BOOK

Rubber Technology

by M. Morton
Rubber Technology
Author: M. Morton
Publisher: Springer Science & Business Media
Total Pages: 643
Release: 2013-04-17
Genre: Science
ISBN: 9401729255
GET BOOK

About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Science and Technology of Rubber

by James E. Mark
Science and Technology of Rubber
Author: James E. Mark
Publisher: Elsevier
Total Pages: 762
Release: 2011-07-28
Genre: Science
ISBN: 0080456014
GET BOOK

The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Rubber Technology and Manufacture

by C. M. Blow
Rubber Technology and Manufacture
Author: C. M. Blow
Publisher:
Total Pages: 564
Release: 1971
Genre: Rubber
ISBN:
GET BOOK

History; Am pitçome pf ribber technology; The physics of raw and vulcanised rubbers; Raw polymeric materials; The chemistry and technology of vulcanisation; Materials for compounding and reinforcement; Reinforcement by fillers; Processing technology; Principles of compounding; Manufacturing techniques; Testing procedures and standards; Professional, trade, research, and standards organizations; Bibliography; References; Subject Index.

Rubber Recycling

by Jin Kuk Kim
Rubber Recycling
Author: Jin Kuk Kim
Publisher: Royal Society of Chemistry
Total Pages: 354
Release: 2018-10-03
Genre: Science
ISBN: 1788015444
GET BOOK

Rubber is used in a vast number of products, from tyres on vehicles to disposable surgical gloves. Increasingly both manufacturers and legislators are realising that recycling is essential for environmental sustainability and can improve the cost of manufacture. The volume of rubber waste produced globally makes it difficult to manage as accumulated waste rubber, especially in the form of tyres, can pose a significant fire risk. Recycling rubber not only prevents this problem but can produce new materials with desirable properties that virgin rubbers lack. This book presents an up-to-date overview of the fundamental and applied aspects of renewability and recyclability of rubber materials, emphasising existing recycling technologies with significant potential for future applications along with a detailed outline of new technology based processing of rubber to reuse and recycle. This book will be of interest to researchers in both academia and industry as well as postgraduate students working in polymer chemistry, materials processing, materials science and engineering.

Developments in Rubber Technology—2

by A. Whelan
Developments in Rubber Technology—2
Author: A. Whelan
Publisher: Springer Science & Business Media
Total Pages: 278
Release: 2013-03-09
Genre: Technology & Engineering
ISBN: 9400981082
GET BOOK

This book is intended for those people who have a knowledge or understanding of rubber materials and processes but who wish to update their knowledge. It should be read in conjunction with Developments in Rubber Technology-l as that volume discussed developments in natural rubber and selected special purpose synthetic rubbers as well as additives. The authors have been selected for their expertise in each particular field and we, as editors, would like to express our appreciation to the individual authors and also to their companies. Such a book would be impossible to produce without such active cooperation as we have received. Volumes 1 and 2 of Developments in Rubber Technology cover rubbers which are processed and vulcanised in the traditional manner. It is appreciated that the omission of non-vulcanised rubber materials (the so called thermoplastic elastomers) will be unwelcome to many readers but it is intended, because of the size of the subject, to cover these materials in a subsequent volume. A.W. K.S.L.