Motorcycle Tuning Two-Stroke

Motorcycle Tuning Two-Stroke
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 182
Release: 2001
Genre: Technology & Engineering
ISBN: 9780750618069

In this well established book, now brought up to date in a second edition, the Technical Editor of `Performance Bikes' shows you how to evaluate your engine, how to assess what work you can undertake yourself, and what is best left to a specialist. The great attraction of the two-stroke is its enormous potential, contrasted with its appealing simplicity. Armed with little more than a set of files, you can make profound changes to the output power of a two-stroke. But these changes will increase the power only if you know what you are doing. `Motor Cycle Tuning (Two-stroke)' will therefore guide you through the necessary stages which can enable a stock roadster engine can be turned into a machine capable of winning open-class races, for an outlay which is positively low by racing standards. Very few other books on engine development and most of these are either devoted to car engines or are out of date Promoted by PERFORMANCE BIKES

Two-Stroke Performance Tuning

Two-Stroke Performance Tuning
Author: A. Bell
Publisher: Haynes Publishing
Total Pages: 272
Release: 1999-11-28
Genre: Transportation
ISBN: 9781859606193

Engine-tuning expert A. Graham Bell steers you through the various modifications that can be made to coax maximum useable power output and mechanical reliability from your two-stroke. Fully revised with the latest information on all areas of engine operation, from air and fuel, through carburation, ignition, cylinders, porting, reed and rotary valves, and exhaust systems to cooling and lubrication, dyno tuning and gearing.

Two-Stroke Motorcycle Engine Maintenance and Repair

Two-Stroke Motorcycle Engine Maintenance and Repair
Author: Dave Boothroyd
Publisher: Crowood
Total Pages: 512
Release: 2016-03-31
Genre: Transportation
ISBN: 1785001213

A workshop guide to the strip-down, rebuild, maintenance and repair of two-stroke motorcycle engines. Author Dave Boothroyd covers the principles and practice of two-stroke engine work, examining a wide range of marques and road, racing and trail motorcycles. With over 450 colour photographs, this new book covers: the chronological development of two-stroke engines and workshop procedures for each era; the examination of each major engine component in turn, including cylinder head, piston, piston rings, crankcase, flywheel, bearings, inlet manifold, clutch, gearbox and primary drive, and, finally, racing motorcycles and tuning engines for best performance; diagnosing problems and workshop safety. This practical reference guide is for the two-stroke motorcycle owner or restorer and is illustrated throughout with over 450 colour photographs.

Popular Science

Popular Science
Author:
Publisher:
Total Pages: 248
Release: 1968-02
Genre:
ISBN:

Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.

Four-stroke Performance Tuning

Four-stroke Performance Tuning
Author: A. Graham Bell
Publisher: Cambridge University Press
Total Pages: 338
Release: 1998
Genre: Transportation
ISBN: 9781859604359

This fully revised and updated edition is one of the most comprehensive references available to engine tuners and race engine builders. Bell covers all areas of engine operation, from air and fuel, through carburation, ignition, cylinders, camshafts and valves, exhaust systems and drive trains, to cooling and lubrication. Filled with new material on electronic fuel injection and computerised engine management systems. Every aspect of an engine's operation is explained and analyzed.

Motorcyle Tuning: Chassis

Motorcyle Tuning: Chassis
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 278
Release: 1994-04
Genre: Technology & Engineering
ISBN: 9780750618403

This third edition, in the same tradition as the second, is a vital servicing tool containing information covering virtually every motorcycle over 50cc sold in the UK since 1980. The author is technical editor of `Performance Bikes' and author of the well known `Motorcycle Tuning' books. The book provides access to the most frequently used data for dealers, mechanics and enthusiasts who have to deal with a wide variety of machines and wish to compare the features of different models. A seperate section lists conversion tables, standard torque settings for threaded fasteners, tyre size codes, tyre speed and load schedules and addersses of importers. Machines are listed alphabetically by manufacturer and then in order of capacity or model number.

How to Tune and Modify Motorcycle Engine Management Systems

How to Tune and Modify Motorcycle Engine Management Systems
Author: Tracy Martin
Publisher: MotorBooks International
Total Pages: 193
Release: 2012-04-29
Genre: Transportation
ISBN: 0760340730

From electronic ignition to electronic fuel injection, slipper clutches to traction control, today’s motorcycles are made up of much more than an engine, frame, and two wheels. And, just as the bikes themselves have changed, so have the tools with which we tune them. How to Tune and Modify Motorcycle Engine Management Systems addresses all of a modern motorcycle’s engine-control systems and tells you how to get the most out of today’s bikes. Topics covered include: How fuel injection works Aftermarket fuel injection systems Open-loop and closed-loop EFI systems Fuel injection products and services Tuning and troubleshooting Getting more power from your motorcycle engine Diagnostic tools Electronic throttle control (ETC) Knock control systems Modern fuels Interactive computer-controlled exhaust systems

Secrets of Speed

Secrets of Speed
Author: Nick Swager
Publisher: David and Charles
Total Pages: 441
Release: 2019-06-06
Genre:
ISBN: 1787115704

The process of building 4-stroke engines to a professional standard, from selecting materials and planning work, right through to methods of final assembly and testing, written for the DIY engine builder in an easy-to-understand style, and supported by approximately 200 photographs and original drawings. Containing five engine inspection and build sheets, and the contact details of approximately 45 specialist manufacturers and motorsport suppliers, the book explains build methods common to all 4-stroke engines, rather than specific makes or models. An essential purchase for all engine-building enthusiasts.