Recommendations for Fatigue Design of Welded Joints and Components

by A. F. Hobbacher

Author	: A. F. Hobbacher
Publisher	: Springer
Total Pages	: 153
Release	: 2015-12-23
Genre	: Technology & Engineering
ISBN	: 3319237578

GET BOOK

This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).

Fatigue Design of Welded Joints and Components

by A Hobbacher

Author	: A Hobbacher
Publisher	: Woodhead Publishing
Total Pages	: 132
Release	: 1996-10-31
Genre	: Technology & Engineering
ISBN	: 9781855733152

GET BOOK

These recommendations present general methods for the assessment of fatigue damage in welded components, which may affect the limit states of a structure, such as ultimate limit state and serviceability limited state. Fatigue resistance data is given for welded components made of wrought or extruded products of ferritic/pearlitic or banitic structural steels up to fy = 700 Mpa and of aluminium alloys commonly used for welded structures.

Fatigue Analysis of Welded Components

by E. Niemi

Author	: E. Niemi
Publisher	: Woodhead Publishing
Total Pages	: 56
Release	: 2006-09-27
Genre	: Technology & Engineering
ISBN	: 1845696662

GET BOOK

This report provides background and guidance on the use of the structural hot spot stress approach to the fatigue design of welded components and structures. It complements the IIW recommendations for 'Fatigue Design of Welded Joints and Components' and extends the information provided in the IIW recommendations on 'Stress Determination for Fatigue Analysis of Welded Components'. This approach is applicable to cases of potential fatigue cracking from the weld toe. It has been in use for many years in the context of tubular joints. The present report concentrates on its extension to structures fabricated from plates and non-tubular sections.Following an explanation of the structural hot spot stress, its definition and its relevance to fatigue, the authors describe methods for its determination. Stress determination from both finite element analysis and strain gauge measurements is considered. Parametric formulae for calculating stress increases due to misalignment and structural discontinuities are also presented. Special attention is paid to the use of finite element stress analysis and guidance is given on the choice of element type and size for use with either solid or shell elements. Design S-N curves for use with the structural hot spot stress are presented for a range of weld details. Finally, practical application of the recommendations is illustrated in two case studies involving the fatigue assessment of welded structures using the structural hot spot stress approach. - Provides practical guidance on the application of the structural hot-spot stress approach - Discusses stress determination from both finite element analysis and strain gauge measurements - Practical application of the recommendations is illustrated in two case studies

IIW Recommendations On Methods for Improving the Fatigue Strength of Welded Joints

by P J Haagensen

Author	: P J Haagensen
Publisher	: Woodhead Publishing
Total Pages	: 90
Release	: 2013-01-25
Genre	: Technology & Engineering
ISBN	: 1782420657

GET BOOK

The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength

Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components

by Erkki Niemi

Author	: Erkki Niemi
Publisher	: Springer
Total Pages	: 85
Release	: 2017-08-28
Genre	: Technology & Engineering
ISBN	: 9811055688

GET BOOK

This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress

Fatigue Strength of Welded Structures

by S J Maddox

Author	: S J Maddox
Publisher	: Woodhead Publishing
Total Pages	: 216
Release	: 1991-01-15
Genre	: Technology & Engineering
ISBN	: 9781855730137

GET BOOK

This new edition encompasses the latest research and particularly the recent standards. The text will be of value to welding engineers and designers, medium to large companies and technical libraries.

IIW Guidelines on Weld Quality in Relationship to Fatigue Strength

by Bertil Jonsson

Author	: Bertil Jonsson
Publisher	: Springer
Total Pages	: 124
Release	: 2016-04-13
Genre	: Technology & Engineering
ISBN	: 3319191985

GET BOOK

This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding). Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds.In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.

Fatigue Assessment of Welded Joints by Local Approaches

by Dieter Radaj

Author	: Dieter Radaj
Publisher	: Woodhead Publishing
Total Pages	: 661
Release	: 2006-10-30
Genre	: Technology & Engineering
ISBN	: 1845691881

GET BOOK

Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. - Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods - Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. - Written by a distinguished team of authors

Fatigue of Welded Structures

by Timothy Russell Gurney

Author	: Timothy Russell Gurney
Publisher	: CUP Archive
Total Pages	: 480
Release	: 1979-12-20
Genre	: Technology & Engineering
ISBN	: 9780521225588

GET BOOK