Refractory Metal Alloys Metallurgy and Technology

Refractory Metal Alloys Metallurgy and Technology
Author: I. Machlin
Publisher: Springer Science & Business Media
Total Pages: 493
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 1468491202

This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.

Physical Metallurgy of Refractory Metals and Alloys

Physical Metallurgy of Refractory Metals and Alloys
Author: E. M. Savitskii
Publisher: Springer Science & Business Media
Total Pages: 296
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 1468415727

The principal reasons which induced the authors to write this book and the features of the book are set forth in the preface to the Russian edition. That section of the science of metals which in Russian is called "metallovedenie" or the "physical chemistry of metals" is generally referred to in scientific and technical literature published in the English language by the term "physical metallurgy." These concepts are much broader than the term" metallography," used in the scientific and technical literature of various countries, and applied solely to research on the interrelationships of the structure and proper ties of metals and alloys. Each science must have its own subject and its own method of research. Certainly, all specialists will agree that metals and alloys, including their solid solutions, mechanical mix tures, and metallic compounds, form the subject of "physical metallurgy" or "physical chemis try of metals." The aim of this science. is to produce a theory and to elucidate the experimental relationships which ought finally to make it possible to calculate quantitatively alloys Of given properties for any working conditions and parameters.

ASM Metals Reference Book, 3rd Edition

ASM Metals Reference Book, 3rd Edition
Author: Michael Bauccio
Publisher: ASM International
Total Pages: 628
Release: 1993-01-01
Genre: Technology & Engineering
ISBN: 9780871704788

This reference book makes it easy for anyone involved in materials selection, or in the design and manufacture of metallic structural components to quickly screen materials for a particular application. Information on practically all ferrous and nonferrous metals including powder metals is presented in tabular form for easy review and comparison between different materials. Included are chemical compositions, physical and mechanical properties, manufacturing processes, applications, pertinent specifications and standards, and test methods. Contents Overview: Glossary of metallurgical terms Selection of structural materials (specifications and standards, life cycle and failure modes, materials properties and design, and properties and applications) Physical data on the elements and alloys Testing and inspection Chemical composition and processing characteristics

Aerospace Materials and Material Technologies

Aerospace Materials and Material Technologies
Author: N. Eswara Prasad
Publisher: Springer
Total Pages: 594
Release: 2016-11-11
Genre: Technology & Engineering
ISBN: 9811021341

This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Structural Materials for Generation IV Nuclear Reactors

Structural Materials for Generation IV Nuclear Reactors
Author: Pascal Yvon
Publisher: Woodhead Publishing
Total Pages: 686
Release: 2016-08-27
Genre: Technology & Engineering
ISBN: 0081009127

Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area

Powder Metallurgy Technology

Powder Metallurgy Technology
Author: G. S. Upadhyaya
Publisher: Cambridge Int Science Publishing
Total Pages: 174
Release: 1997
Genre: Iron
ISBN: 1898326401

Annotation Contents1 INTRODUCTION; 2 METAL POWDER PRODUCTION; 3 METAL POWDER CHARACTERISTICS; 4 METAL POWDER TRE-AMENT; 5 METAL POWDER COMPACT-ION; 6 SINTERING; 7 HOT CONSOLIDATION; 8 SECONDARY TREATMENT; 9 POWDER INJECTION MOULDING; 10 QUALITY CONTROL OF POWDER METALLURGY MATERIALS.

TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings

TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings
Author: The Minerals, Metals & Materials Society
Publisher: Springer Nature
Total Pages: 1597
Release: 2022-03-11
Genre: Technology & Engineering
ISBN: 3030923819

This collection presents papers from the 151st Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Extractive Metallurgy of Niobium

Extractive Metallurgy of Niobium
Author: A.K. Suri
Publisher: Routledge
Total Pages: 272
Release: 2017-11-13
Genre: Science
ISBN: 1351448978

The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Elements of Metallurgy and Engineering Alloys

Elements of Metallurgy and Engineering Alloys
Author: Flake C. Campbell
Publisher: ASM International
Total Pages: 671
Release: 2008-01-01
Genre: Technology & Engineering
ISBN: 1615030581

This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.