Tubular Structures X

by Angel Alonso
Tubular Structures X
Author: Angel Alonso
Publisher: Routledge
Total Pages: 640
Release: 2017-10-02
Genre: Technology & Engineering
ISBN: 1351406760
GET BOOK

This volume contains the Kurobane lecture and proceedings of the Tenth International Symposium on Tubular Structures - ISTS10, held in Madrid, Spain, 18-20 September 2003. The ISTS10 provides a platform for the presentation and discussion of seventy-three lectures covering themes including: bridges; roofs; design aspects and case studies; static joint behaviour; fatigue; members; beam-column connections; finite element methods; concrete filled tubes; trusses and frames; cast nodes; and behaviour of tubular structures under fire. This book provides a useful reference work for architects, civil and mechanical engineers, designers, manufacturers and contractors involved with tubular structures.

Tubular Structures XIII

by Ben Young
Tubular Structures XIII
Author: Ben Young
Publisher: CRC Press
Total Pages: 0
Release: 2010
Genre: Business & Economics
ISBN: 9780415584739
GET BOOK

This paper presents a series of test results carried out on elliptical Concrete-Filled Tube (CFT) columns. The tests were conducted to investigate the effects of variations of concrete strength and column slenderness on the behaviour and axial strength of the columns. The experimental study was carried out on ten specimens of short and long columns with Self-Consolidating Concrete (SCC). One elliptical steel section was used with three different typical concrete strengths to determine the reduction of column strength with the increase in column length. All specimens were tested to failure to assess their load carrying capacity, deformation and structural behaviour.

Cold-formed Tubular Members and Connections

by Greg Hancock
Cold-formed Tubular Members and Connections
Author: Greg Hancock
Publisher: Elsevier
Total Pages: 255
Release: 2005-08-17
Genre: Technology & Engineering
ISBN: 008052933X
GET BOOK

Cold formed structural members are being used more widely in routine structural design as the world steel industry moves from the production of hot-rolled section and plate to coil and strip, often with galvanised and/or painted coatings. Steel in this form is more easily delivered from the steel mill to the manufacturing plant where it is usually cold-rolled into open and closed section members.This book not only summarises the research performed to date on cold form tubluar members and connections but also compares design rules in various standards and provides practical design examples.